Line 6 · HX Stomp preset

Marshal10Joyo

For most superczartemple tracks by superczartemple

WARNING: this patch is old, ver 1, there is now a ver 3 you should try! Look for JoyoAmMarshG30R with ver3 in the comment. ----------- This HX Stomp (or helix) patch emulates a Joyo American pedal running into a Marshall G30RCD Practice Amp with 1x10" 30W speaker. (A/B'd with real hardware!). We use a Limiter at the end (LA Studio Comp) to simulate the natural compression you get from the low wattage speaker at high volumes. Unfortunately we dont have Speaker Distortion in the HX tools, but it's not really noticable. We use the US Deluxe Vib AMP since the JOYO American is based off the Fender 57 Deluxe - ITS NOT PERFECT, the sound gets fuzzy (in a wrong way) when the bass is turned up, so we keep it at 2.5 (really low), and adjust with EQ later. We use the 10" Princess CAB since it's the closest thing to the Marshall's 10" cab. Placing the mic away from the cab, plus early reflections, reduces artificial crispness, adding a slight fuzz that the real speaker has. We low-cut at 190hz and high-cut at 2.6khz to further simulate the 10" speaker (which being a small speaker doesn't have a lot of bass, nor a tweeter for crisp highs). I run a Maxon OD808 into this, but you can use the built in tube screamer too - the real pedal is slightly less harsh, which i prefer. I included a TubeScreamer on FS1, and a spring reverb tank on FS2 - key sounds for superczartemple. I also included an IR loader for your convenience, you can switch from the cab to the IR, add whatever IR you like there - or ignore it. My Epiphone Les Paul guitar is set to "Treble" and Bridge pickup, all knobs at 10. Rhythm with mainly 5ths (3 note powerchords), 3rds (2 note), and single notes, played in open/palm mute style.

Created by subatomic