Line 6 · Helix preset

MIDI CONTROL1

An original sound

This is NOT a sound Patch file although I have added six blocks in path 1 A and B. This is a TEMPLATE to use as a startng point to build a patch that has MIDI TRANSPORT CONTROL for the REAPER DAW and possibly other DAWS as well. Delete the Blocks in Path A and add your own! Using Footswitches 7,8,9,10 and 11 in STOMP MODE you can transmit REWIND, RECORD, PAUSE, STOP and PLAY commands to your DAW. PLEASE, PLEASE, PLEASE note that Footswithch 7,8,9,10, 11 must not be assigned to any Blocks or you will cause a real mess! In the GLOBAL settings the MIDI/TEMPO settings to make this happen are: Midi Base Channel = 1; Midi Thru = On: MIDI Over USB= On; MIDI PC Send/Receive = On Set the FOOTSWITCHS Global settings to: Preset/Mode switches = Preset/Stomp; Stomp Mode Switches = 10 Switches; Up/Down Switches = Banks Of Course, you may want to set these to someting else when not working with a DAW which is fine. I have a Bank set for DAW patches and others set for "LIVE" i.e. not recording patches. Switching back and forth on Globals in no way effects your patches. Once these Global settings are made the MODE Button (6) will switch between: Bank Mode: switches 1 and 7 provide Bank up/down + switches 2,3,4,5 provide patch A, B, C, D AND switches 8,9,10,11 provide RECORD, PAUSE, STOP and PLAY as it is in "Stomp" MODE). Stop Mode: Switches 1,2,3,4,5 provide Block select On/Off in either Path 1 or Path 2. What matters is that NO BLOCKS ARE ASSIGNED TO SWITCHES 7, 8, 9, 10 11. Switches 7, 8, 9, 10, 11 are now assiged to the the REWIND, RECORD, PAUSE, STOP and PLAY functions. You can go to the Command Center in either the HELIX or the HELIX Editor and see the commands and assignments. All the command messages are "MMC" (MIDI MACHINE CODE) except the RECORD command. That code is a "CC toggle" ( Command Code-toggle). This code is defined by the DAW and is defined as CC#28 in REAPER. Other DAWS may have a different code and you will need to refer to that DAW's documentation and change the number in order for the RECORD switch to work. Good Luck - Bo Baker

Created by gbbaker