Line 6 · Helix preset

Disaster Tran.SR

An original sound

*FIRMWARE 3.71* Highly recommend EarthQuaker Devices Disaster Transport SR Pedal. I own one and love it. I designed this patch to mimic the settings with a main Delay of 465ms in parallel with Reverb slamming into a 232ms Delay and low rate modulation. Works well on clean to breakup and soloing. Of course, the real thing is far better but this is pretty close. </p> This patch has a two-stage Pre / Boost section for each snapshot, resulting in a better feel for each snap.</p> Snap 1 - CLN - Bright with a little breakup without stomping on the Pre / Boost. Engage for full-on crunch.</p> Snap 2 - Crunch - More gain, slightly lowered bass. Stomp on Pre, and or Boost for crunch / classic rock tone.</p> Snap 3 - HeavyDirt - For that 90’s Grunge, and If you stomp on the Xotic Boost, it allows for more modern Dirt with a little flubby deep bottom end.</p> Snap 4 - Lead - Boosted from Snap 3 and by default has the Dis.TransportSR for a great lead tone that cuts through a mix well.</p> All snapshots of this patch can make use of the stomps which include Tube PreAmp, Xotic Boost, Sizzle (Dual Pitch w/ +/- 9.0 Cents for 90’s Chorus like effect), and of course the main reason for this patch, the Disaster Transport SR’ish effect. Use the Expression pedal (used EXP2) to allow more MIX. Note, on the Helix edit, make use of the Tilt EQ to dial in to cut through a mix for both live and recording. </p> My Guitar Setup for this patch: Baritone PRS SE 277 Mahogany w/Maple Veneer and PRS 85/15 Stock Pickups. Also seems to work rather well on all my other normal scale guitars.</p> NO Aftermarket IR's

Created by synsin