Line 6 · Helix preset
Dani California
For Dani California by Red hot chili peppers
I have a very specific workflow for my Helix. My patches are all designed to be used in eight-snapshot mode. Further, my output signal path splits in two to allow me to go direct to FOH via XLR (including cab block) and to a stereo amp via the 1/4" output (excluding cab block). As such, my outputs 2A and 2B outputs are set to XLR and 1/4" respectively, not to Multi, so you won't get any signal over USB unless you modify the patch and also you must have your headphone monitoring the XLR output only or you will get weird mix of XLR with cab and 1/4" without cab in your headphones. - The patch uses the Line6 2204 Mod amp block with a stereo cab (for 2A XLR out only). - It's designed for use with a standard USA Strat with stock pickups. All clean parts should be played in position 1 (neck) and all drive parts should be played in position 5 (bridge). - Various parameters of the amp are assigned to snapshots allowing me to change them according to the relevant snap. - There is a Fassel wah block which is assigned to EXP2. The Wah kicks in automatically once you engage the pedal beyond zero, and bypasses 300ms after EXP2 goes back to zero. - Input gate is on due to the noisiness of some of the snaps, particularly with a strat in position 5. - The snapshots represent different parts of the song and are laid out in a way that makes them easy to navigate as the song progresses. 1. Verse - clean tone. Drive on the amp set to 0.6. 2. Chorus - Drive on the amp increases to 2.4, volume compensates accordingly 3. Bridge - clean tone with a fast Ubiquitous Vibe engaged 4. Lead - for the outro of the song. Drive 8.7, Top Secret OD engaged 5. Verse Octave - for the pre-chorus before the last chorus where Frusciante plays an E on the 12th followed by E7 on the 17th 6. Phase Harmony - for the lead after the first chorus 7. Single Harmony - for the first part of the lead over the last chorus 8. Twin Harmony - for the second part of the lead over the last chorus Enjoy!
Created by johnsherlock
Helix preset
Get preset on CustomTone ↗ Opens the original listing in a new tab. That site provides the download.- File
- Original source
- Extra files
- Check source
Made this tone? Host the file on TonePush.
This tone was indexed from CustomTone. TonePush never copies files from other sites, which is why the download button links there. If you are the author, you can host the file here yourself: downloads then come straight from TonePush, and the Editor can install it onto a pedal. Only upload the file if you are its author.
Sign in to host your file. We will bring you back to this open upload form.
Rig details
- Device
- Helix
- Source downloads
- 2,945
What you need
TonePush has no extra files listed for this indexed tone. Check the original listing before downloading.