Line 6 · Helix preset

PB EXP2 Mix 3!!

For PB EXP2 Mix 3!! by Christian Boddum

Hi! Ever had the problem; stereo sound but only mono monitor? This is what I've come up with. You need 3 sends, 1 for mono AUX monitor - summed to mono without phase issues. 2 for FOH unaltered stereo goodness - not being sent to monitors!!! and also 2 for stereo FRFR amps if needed. Here the XLR is the mono source for monitoring. send 1/2 is for FOH stereo send 3/4 is for amps or the Jacks out - Jacks having EXP 3 as a separate volume for leads and overall level. I've got gigs coming and I wanted to fix this issue. The only downside is you need 3 channels on the mixer, alternatively 1 mono and 1 stereo to pull it off. I have a 12 ms. stereo spread on the FOH and amp outs that would give phase issues on the summed mono signal, not here!! :-) You can also use the XLR alone if you are alright with mono FOH sound. I set the volume control to digital, to disengage it (use EXP3 instead) Try it! Ps. The EXP2 handles many parameters on delay and reverb so be mindful of that, so you can fade in and out how much efx you want.

Created by ChristianBoddum